Products

Fast-setting screeding mortar "Mix"
Self-levelling compound "Mix"
Tanking systems
Tile adhesives "Fix"
Binder / Primer
Tile grouts
Cleaning and maintenance
Smooth rendering and paints
Acoustic underlay
- Acoustic PS3 - Recycled
  
  Acoustic underlay

Frontpage Products Tile grouts Montagelim

Montagelim

1-component all-round mounting adhesive

Suitable for installing both light and heavy materials on a wide range of substrates
Strong and elastic glue join
Ideal for installing mirrors, panels, tiles, stair nosings, sheet material, etc.
Rapidly achieves good adhesive strength
For interior and exterior use on floors, walls and ceilings
Paintable
Extremely resistant to climatic influences
UV-resistant
Low emission: EC1 plus
Meets the DGNB 2020 criteria: Criterion 11 / quality level 4
Can be used in Swan-labelled construction via Nordic Ecolabelling

Retailers

Product information

Product

1-component Silane Modified Polymer (SMP).

Neutral hardening system.
Solvent-free.

Coverage

2–3 m²/cartridge, depending on dimensions and strength requirements

Packaging

290 ml cartridge.

Unit	Code No.	DB No.
290 ml	6670	2315912

Technical data

Working temperature
- +5°C - +40°C
Temperature resistance
- -40°C - +90°C
Breaking strength
- 3,0 MPa
Elongation at break
- 200 %
Skin formation
- 4–8 minutes, depending on the prevailing climatic conditions
Hardening speed
- Approx. 2 mm/day, depending on the prevailing climatic conditions
Hardness
- Approx. 60 shore A
Movement
- +/- 20 %
Climatic ageing
- Good
Storage time
- 24 months in cool, dry conditions and unopened packaging

Colours

Available in white.

Application

Surfaces

Concrete, brick and KC-mortar based rendering. Wood.
Eternit and cement-based panels. Plexiglas and fibreglass.
Painted surfaces.
Most metals. Many types of plastic and rubber.

Surface preparation

Substrates/adhesion surfaces must be completely clean, dry and free from loose particles, grease and oils,
dirt, etc.
Depending on the substrate, clean off any grease, oil and soap residue with Alfix Deep Cleaner, methylated
spirits, acetone or another suitable solvent.
Check that any paint is sufficiently adhering and non-flaking.
As there may, in practice, be variations in the substrates in question, always perform a test installation before starting the main task.

How to use

Apply lines of Alfix Montagelim (Mounting Adhesive) to the substrate or to the material that is to be mounted.
The distance between the lines of adhesive should be 50–200 mm depending on the strength required.
Always comply with the supplier’s instructions regarding the mounting of the material.

Press the material firmly and carefully onto the adhesive and the substrate.
When mounting heavy items, or when performing special mounting tasks, it may be necessary to support the
material to prevent vertical displacement, and to apply extra securing measures to prevent the heavy item
falling off the wall, for example, until Alfix Montagelim 330 has had time to harden.
Mounting mirrors: apply the adhesive in vertical lines approx. 100 mm apart. Make sure to support mirrors for
at least 2 days – including support to prevent them falling off the wall.

Cleaning

Unhardened adhesive residue: remove with a rag dipped in turpentine. Hardened adhesive can only be
removed by scraping.
Wash hands and skin thoroughly with soap and water.

Film

Guidance

See how to use Alfix products for your construction projects.

See guides

Downloads

Product info

Download

Emicode

Download

Material Safety Data Sheet

Download