Frontpage Products Tanking systems Epoxy Membrane

Epoxy Membrane

Acid-resistant sealing membrane

For under-tile water proofing in pools, changing rooms, and leisure areas

For interior and exterior use
Effective under tile water proofing
High chemical and mechanical resistance

Retailers

Product information

Product

2-part epoxy resin system for scattering with dry quartz sand, grain size 0.7 – 1.2 mm (type 2)

Coverage

Approx. 2.6 kg/m² (1st coat: approx. 1.5 kg/m², 2nd coat: approx. 1.3 kg/m²) + approx. 3.5 kg sand.

Packaging

10 kg units containing matching volumes of each component, A and B.
Sand is available in 25 kg bags.

Flooring

Prior to tile fixing, any excess sand should be removed by vacuuming.
Suitable adhesives for subsequent tile fixing: Alfix ProFix and ProFix Special with FlexBinder (1:1 diluted with water) or Alfix EpoxyFuge 20

Precautions

	Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 13	Ydeevnedeklaration nr. 50	EN 14891 Alfix Epoxy membran Epoxybaseret tætningsmasse Inden- og udendørs anvendelse. EN14891: RM 02 P
Vedhæftningsstyrke efter tørlagring	≥ 0,5 N/mm²	Vedhæftningsstyrke efter vandlagring	≥ 0,5 N/mm²
Vedhæftningsstyrke efter varmelagring	≥ 0,5 N/mm²	Vedhæftningsstyrke efter lagring i kalkvand	≥ 0,5 N/mm²
Vedhæftningsstyrke efter frost-tø lagring	≥ 0,5 N/mm²	Vandtæthed	Tæt, ≤ 20 g vægtforøgelse
Vedhæftningsstyrke efter lagring i klorvand	≥ 0,5 N/mm²	Revneoverbygning ved normaltemperatur	≥ 0,75 mm
Revneoverbygning ved lav temperatur -5 °C	≥ 0,75 mm	Farlige stoffer	Se sikkerhedsdatablad på www.alfix.com

Tests

Epoxy membrane has been tested at the German Institute: Amtl. Materialprüfanstalt für Steine und Erden, Clausthal-Zellerfeld and meets the requirements of the following standards: Prüfzeugnisse M 9954-1 and M 9954-2

Technical data

Working temperature
- + 10°C + 30°C
Density
- 1.3 kg/litre
Working time
- 45 minutes at +20°C
Foot traffic
- After 16 hours at +20°C
Tile fixing
- After 48 hours at +20°C
Crack bridging
- Up to 1.6 mm
Elastic modulus
- 280 N/mm²
Tensile strength
- 1.2 - 2.0 N/mm²
Shrinkage
- None
Shelf life
- Approx. 12 months, dry and not below +10°C in unopened packaging

Sealings

For sealing of junctions between wall and floor, movement joints, internal corners, and around sanitary installations, prepare adapted pieces of Alfix Sealing strip to be subsequently bedded in a coat of Alfix Epoxy Primer.
Pipe penetrations and drains should be incorporating flanges ready to receive sealing strip and drain mats.

Application

For interior and exterior under-tile water proofing in e.g. dairies, milking rooms, slaughterhouses, in- and outdoor swimming baths, and purification plants. Upon curing the membrane is water and liquid proof and resistant to a number of chemical and mechanical stresses.

Application

Downloads

Epoxy Membrane

Product

Coverage

Packaging

Flooring

Precautions

Tests

Technical data

Sealings

Application

Surfaces

Surface preparation

How to use

Cleaning

Guidance

Downloads

Product Info

DOP

SDB Epoxy Membran - A-komp_v1.0EN

SDB Epoxy Membran - B-komp_v1.0EN