Frontpage Products Smooth rendering and paints DuraDec 8000 SR

DuraDec 8000 SR

Silicone resin-based facade paint

For interior and exterior use
Weathering resistent
Highly water and dirt repellent
Prevents algae and fungus growth
Exellent coverage
Water vapour permeable, class V1
Up to 20 years of protection
Suitable for painted surfaces

Calculate

Retailers

Product information

Application

Surfaces

Concrete, fully cured silicate and rendered facades, as well as painted surfaces.
For concrete and newly rendered facades, allow at least 12 months before any further treatment.

For further details, please contact our Service Technical Department.

Surface preparation

The surface should be clean, dry and structurally sound. If required, clean the surface using Alfix Deep Cleaner.
Facades of bricks or limestone should be frost resistant.
Any damages or defects should be repaired before painting. The surface should be free from moisture and efflorescence.
For absorbent surfaces, apply Alfix PlaneMixPrimer diluted with water 1:6.

How to use

Stir welle and apply Alfix DuraDec 8000 SR to the surface in 2 coatings using roller, brush or airless sprayer. Can be diluted with max. 20% water if suitable for the job.
Always carry out a small test to ensure compatibility of paint and substrate!
To avoid visible lines of colour differences, it is recommended to finish each wall in one ongoing work process.

Note!
Dark colours are particularly receptive to impacts caused by weather conditions during work as well as surface texture and suction. These on site conditions may result in variations in final appearance and colour differences. Hence, in case of dark and intense colours, it is of significant importance to ensure a uniform surface texture and suction. Prepare and organize the job in order to finish each wall in one
unbroken process and protect against climatic impacts during work and until completely dried.

Tinted facade paint
To ensure colour uniformity, tinted facade paint should preferably be of same production batch or be thoroughly mixed together before use. Tinted facade paint is non-returnable.

Exterior work with render should only take place in dry weather at temperatures between +5ºC and +25ºC - avoid direct sunlight.
If rainy weather or temperatures below +5ºC are forecast, cover facades.
Avoid exterior painting during the winter season.

Cleaning

Clean residues from tools with water and soap before the paint dries up.

Maintenance
In order to preserve the desired cosmetic appearance of the rendered and painted façade, the façade
surface must be checked for the presence of fouling growth at least every five years – or more often if
necessary.
To the same end, it is useful to check the general condition of the façade with regard to damage to the
paint, render, elastic joints, etc. for subsequent repair.

Downloads

DuraDec 8000 SR

Product

Coverage

Packaging

Technical data

Colours

Coverage

Surfaces

Surface preparation

How to use

Cleaning

Guidance

Downloads

Produktinfo

EPD

Material Safety Data Sheet