Frontpage Products Tile adhesives "Fix" EpoxyFuge 20

EpoxyFuge 20

Acid-resistant tile adhesive and grout

For adhesion and grouting of ceramic tiles, mosaics and quarry tile
Suitable for pools and the food and chemical industries, for example
Can withstand high mechanical load
For interior and exterior use
Joint widths from 1-20 mm
For both walls and floors
Smooth and easy to work with
Extremely low emissions, EC1 plus

Product calculator

Retailers

Product information

Product

2-component epoxy systeem, solvent-free.

Coverage

Tile installation: Approx. 1,4 kg/m² per mm layer thickness.

Notched trowel

Kg pr. m²

4 x 4 mm

approx. 1,4

6 x 6 mm

approx. 2,8

8 x 8 mm

approx. 3,8

10 x 10 mm

approx. 4,7

Grouting

Kg pr. m²

Tile size / joint width

119 x 244 x 6 mm / 6 mm

approx. 0,7

119 x 244 x 7,5 mm / 6 mm

approx. 0,9

119 x 244 x 8 mm / 6 mm

approx. 0,9

115 x 240 x 10 mm / 10 mm

approx. 1,9

115 x 240 x 11 mm / 10 mm

approx. 2,1

Grouting other tile dimensions: See the consumption calculator at www.alfix.com/forbrugsberegner.

NB!
Do not use the product at temperatures below +10 C and above +30 C.
Temperatures lower than +15 C can complicate the work process.
Temperatures higher than +25 C will shorten the working time.
The recommended temperature for use is between +18 C and +23 C.

The product must be stored at min. +10 C to prevent crystallisation.
If crystallisation has occured, this can be resolved by heating the prodict to between +30 C and +45 C.
To ensure the correct consistency, cool the product subsequently to room temperature before use.

Packaging

Supplied in a 6 kg plastic bucket containing component A (binder) and componenet B (hardener).

Precautions

	Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 23	Declaration of performance no. 55	EN 12004 Alfix EpoxyFuge 20 Epoxy-based tile adhesive with improved adhesion. Indoor and outdoor use.
Fire classification	Class E	Hazardous substances	See the material safety data sheet at www.alfix.com
Tensile adhesion strength after dry storage (EN12004:2007+A1:2012)	≥ 2,0 N/mm²	Tensile adhesion strength after freeze-thaw cycles (2004:2007+A1:2012)	≥ 2,0 N/mm²
Tensile adhesion strength after water immersion (EN12004:2007+A1:2012)	≥ 2,0 N/mm²

Tests

Tests: EN 13888 RG and EN 12004, R2 T

Technical data

Working temperature
- +10°C - +30°C
Density
- Approx. 1,4 kg/litre at +20°C
Working time
- Approx. 50-60 minutes at +20°C
Washable
- After approx. 15 minutes or no more than 1 hour at +20°C
Walkable
- After 16 hours at +20°C
Partial/Full strength
- After 2 days/7 days at +20°C
Tensile strength, concrete
- Fracture in substrate 2 N/mm²
Temperature resistenced
- +100°C
Storage time packaging
- At least 12 months in dry conditions at not less than +15°C, in unopened packaging i uåbnet emballage

Technical enquiries

Theme info: Grouting with Alfix EpoxyFuge 20.
Material safety data sheet.
Product information and safety data sheets are published on our website. You can also access them by scanning the QR code on the product packaging or via the Alfix app, which is available from the App Store or Goggle Play.

If you have any doubts or would like additional information concerning chemical resistance, contact our Technical Service Department. For the most recently updated version of this data sheet, go to www.alfix.com.

General information

Substrates/adhesion surfaces must be clean, dry and free from cracks, loose particles and other substances that may impede adhesion.
Concrete substrates must feature a cohesive strenght of > 1,2 N/mm2.
Substrates comprising layers of cement render and concrete leveller must feature a cohesive strenght of > 0,8 N/mm2.
Site-poured concrete and prefab elements must be at least 3 month old.
Cement render and concrete leveller, min 28 days.

Colours

Titanium grey

Application

How to use

Remove the container of componenet B and shake thoroughly
Briefly stir componenet A using a mixing hook fitted to power drill operating at low speed
Pour in the liquid componenet B and mix to form a homogeneous, uniform paste. Scrape the sides and bottom of the bucket during the process.
In order to ensure that the mixture is homogeneous, we recommend pouring the epoxy paste into a clean bucket and mixing once more before use

Grouting: Press Alfix EpoxyFuge 20 into the joints using a plastic or hard rubber trowel. Work diagonally across the joints and pull the trowel back and forth to press the grout firmly against the tile edges.
It is best to wash the surface after 15-20 minutes. Use clean, hot water with a dash of detergent if appropriate.
Using as little water as possible, scrub/emulsify the surface with a fine scouring pad. Continue until a fine and even layer of sludge has been formed over the tiles and the joints are filled. Wash down with a tile- or viscose sponge, rinsing it regularly in hot water. Replace the rinsing water foe every 6 kg of mixture. Add up to 10% methylated spirits to the water for the final rinse. Do not allow surplus water to build up in the joints.
After 5-15 hours, carry out a final clean to remove any epoxy film. To remove any epoxy residue, try using CR10 from FILA or SERVICE EPOSOLV frem Treetops.

Tile installation Apply Alfix EpoxyFuge 20 to the substrate using a smooth trowel, and then use a notched trowel to create a ridged bed. Install the tiles within the applicable open time. When installing tiles outdoors and in situations with a high mechanical load, use a full-coverage adhesive layer.

NB
Working with epoxy products requires special training according to:
Annex 3 to Danish Working Environment Authority regulations no. 381 of 12 April 2023 concerning work with substances and materials (chemical agents).

Result
In most cases, finished grout lines should not normally be rinsed out deeper than 1 mm. If the tiles have rounded edges, the grouting can be adjusted to match. Minor colour deviations may occur.

Cleaning

Use varm water mixed with detergent to clean grout residue from tools, etc. immediately after use.
Hardened grout can only be removed by scraping. To remove any epoxy residue, try using CT10 from FILA or SERVICE EPOSOLV from Treetops.
One used, the product is classified as hazardous waste. Please make use of the municipal collection and disposal schemes.

EpoxyFuge 20

Product

Coverage

Packaging

Precautions

Tests

Technical data

Technical enquiries

General information

Colours

How to use

Cleaning

Guidance

Downloads

Product info

DOP/Ydeevnedeklaration

EMICODE

MILJØDATABLAD
PRODUCENTERKLÆRING

Grout colours

EPD

Miljødokumentation
Oversigt alle produkter

Temainfo

SDB EpoxyFuge 20 - A-komp_v1.0EN

SDB EpoxyFuge 20 - B-komp_v1.0EN.pdf

EpoxyFuge 20

Product

Coverage

Packaging

Precautions

Tests

Technical data

Technical enquiries

General information

Colours

How to use

Cleaning

Guidance

Downloads

Product info

DOP/Ydeevnedeklaration

EMICODE

MILJØDATABLAD PRODUCENTERKLÆRING

Grout colours

EPD

Miljødokumentation Oversigt alle produkter

Temainfo

SDB EpoxyFuge 20 - A-komp_v1.0EN

SDB EpoxyFuge 20 - B-komp_v1.0EN.pdf

MILJØDATABLAD
PRODUCENTERKLÆRING

Miljødokumentation
Oversigt alle produkter